Sizing Scoot Enduros
Sizing Scoot Enduros
Access your copy of the Scoot Boot, Scoot Enduro and Scoot Skin Sizing Guide Charts
When to choose Enduros?
Scoot Enduros fit horses with high-heeled hooves and mules, but may suit some horses with underrun heels, and other hoof types not suitable for Scoot Boots.
The Scoot Enduro’s shape mimics the Scoot Slim to accommodate these hoof types.
The Scoot Enduro's adjustable rear comfortably fits these hoof shapes and provides more fitting options for the barefoot horse and mule.
Scoot Enduro is the best Scoot option for long-distance riding over 60km/40miles.
The Scoot Enduro should fit snugly around the hoof wall, with adequate tension on the Front Straps, like the Scoot Boot.
Use the same techniques for checking the size around the hoof wall as the Scoot Boot.
If you are unfamiliar with sizing Scoot Boots, we recommend you start with Module 3 - Sizing Scoot Boots and Module 4 - Fitting Scoot Boots.
Scoot Enduro Sizing Kit
The Enduro sizing shell is only used for sizing and fitting. It is a Scoot Enduros cannot be ridden in.
The Scoot Enduro should fit snugly around the hoof wall, with adequate tension on the Front Straps, like the Scoot Boot. Use the same techniques for checking the size around the hoof wall as the Scoot Boot. If you are unfamiliar with sizing Scoot Boots, we recommend you start with Module 3 - Sizing Scoot Boots and Module 4 - Fitting Scoot Boots.
The best method for sizing Scoot Enduros is in-person sizing using the Enduro Sizing Kit. If you cannot attend, consider offering a shell hire service to your customers. This allows you to check the size and fit remotely through photos sent by your customer. Shell hire services can be advertised on our stockist locator.
​
Request the following photos from your customer to evaluate for sizing. Photos must be taken within 2 weeks of a fresh trim for accurate sizing. Scoot Enduros are available by the pair as well as the single boot, checking the size of each hoof will ensure a correct fit all-round.
​
Scoot Enduros are designed to fit comfortably for a full 6-week trim cycle.
1
Heel assesment
- SIDE -
​
Ask your customer to hold the camera low to the ground when taking the picture. This side view will allow you to evaluate the shape of the heel and heel bulbs.
​
Note: This side view will allow you to evaluate the shape and height of the heel and heel bulbs.
2
Verical assesment
- FRONT -
​
Ask your customer to hold the camera low to the ground. This front view will allow you to evaluate the shape of the hoof wall.
​
Note: Photos taken too high can exaggerate the appearance of flare and add an elongated
3
Sizing photo
- LENGTH -
​
Ask your customer to start at the tip of the toe. The correct measurement is taken from the tip of the toe stopping at the heel buttress. 120mm or 4 3/4" in this example.
​
Note: Viewing the hoof clean from debris will help you see the heel buttress clearly. The measurement is 120mm or 43/4" in this example.
4
Sizing photo
- WIDTH -
​
Ask your customer to place their tape measure across the widest part of the hoof. )
​
Combining the measurement of the length and width will help you to determine the size.
​
Note: The measurement is 120mm or 4 3/4" in this example. This hoof shape indicates a Scoot Slim.
Measure to the heel buttress only, and not to where the hoof contacts the skin.